Material

Search results
material characteristics

moisture tolerant

SPSG

>>more SPSG (single-pane safety glass) offers increased shock- and impact resistance, as well as improved resistance to thermal-shock. SPSG is thermally or chemically pre-stressed glass produced in

Decorative Films for Glass

>>more Self-adhesive decorative films are glued while wet to large glass surfaces—even to those already installed—in strips that slightly overlap. Foils that are transparent or semi-transparent in

PETG

>>more PETG is a colorless thermoplastic with high impact strength. By printing on the back, we produce a bright, contemporary visual effect. Suitable for interior use. Washable on the unprinted side.

PC (Polycarbonate)

>>more PC (Polycarbonate), printed on the front or rear, distinguishes itself in its extreme resistance to impact and breakage. Good stability as it ages, regardless of atmospheric conditions; comparable

PC convex/concave

>>more PC (convex/concave), printed on the front and used as a domed canopy to define and accent areas of a room. The canopies, available with a radius of 60 degrees or 90 degrees, are easily fastened to

PMMA/Acrylic

>>more This Plexiglass, suitable for printing on the back, is available in two grades: extruded (XT) or poured (GS). Plexiglas GS is cast in a form made of glass panels. It is virtually as clear as glass

Acrylic mirror

>>more · Panel thickness: 3 mm, printed on the front.· Panel dimensions: 205 x 305 cm, 122 x 305 cm, 100 x 200 cm, 190 x 305 cm· B2 normal flammability (DIN

Acoustic PMMA/PETG

>>more Acoustic PMMA/PETG, finely-perforated plastic panels with an image printed on the back, serve as a sound insulating, decorative material. By means of subtle perforations having a hole-diameter of

Trevira CS fabric

>>more Trevira CS fabric is available in a wide variety of thicknesses and visual effects, and it is easy to work with. It reliably delivers a fine, very brilliant image. Trevira CS can be hung as

Trevira CS (bioactive)

>>more Trevira CS (bioactive) satisfies stringent hygienic requirements. The active ingredient – silver ions dispersed in a polymer – are integrated with the fibers. Bioactive Trevira CS is

Fiberglass fabric

>>more Fiberglass fabric—sound absorbing, for all special textile/fabric solutions such as ceiling canopies, fabric sculptures, light boxes and light walls. Functional for its acoustic effectiveness and

Finely-perforated steel sheets

>>more Finely-perforated steel sheets with an acoustic layer, are used as paneling and ceiling decking for sound insulation. Suitable for cooling ceilings. Thermally conducting. · Hole diameters of 0.7

Plywood

>>more Plywood in the building-materials class B1 is bonded to be waterproof (DIN 68705, type AW 100). This plywood is attractive for its low smoke-production when made from beech or spruce. Does not

HPL for Damp Spaces

>>more The mineral filler of silicate fire-resistant panels makes them resistant to moisture, dimensionally stable, and self-supporting. Shock-resistant gypsum fiberboard (see also fire-resistant HPL) is

HPL-Fire-Protection

>>more Fire-protection is preserved by installing as support panels fire-resistant panels combined with 0.5 mm HPL layer. Depending on the country, case-by-case authorization may be required. HPL combined

Glass

>>more Our paintwork—or coating—on glass is similar in scratch-resistance to silk-screen printing. Excellent adhesion and extremely good resistance to UV radiation make the coating quite safe for

Plastics

>>more Most plastics are considerably lighter than other materials because they are so thin. Although they are comparatively weak, plastic parts break less easily than ceramics or glass, for example. But

PVC/Vinyl/Polyester

>>more With engineered films, we provide a clear, modern color rendition for existing surfaces such as glass, walls, cabinet doors, etc. Suitable for all dry, flat substrates. Large surfaces are glued

Standard Films

>>more Depending on the surface, self-adhesive standard films are available in matte or glossy finish. An additional lamination protects the surface, making it hygienic and easy to wipe clean. In

Metal

>>more Aluminum in rods and sheets has an array of desirable characteristics, including its modest thickness compared to steel or other heavy metals, its workability. It is also incombustible. In

Vinyl-Acrylic

>>more Acrylic-vinyl protective wall panels are impact- and scratch-resistant, B1 self-extinguishing, and resistant to chemicals. Because these panels are quite thin, they are suitable as protection for

Antibacterial Acrylic-Vinyl

>>more Antibacterial coverings for walls and wainscoting in clinical applications offers long-term protection against mold, bacteria, and germs. Acrylic-vinyl wainscoting protection is insensitive to

Eternit panels

>>more Fiber-cement panels are non-flammable, impact-resistant, waterproof, and they are never affect by changes in dampness or dryness. We offer customized colors based on your color specifications, as

Ceramic

>>more Ceramics are a class of durable, nonflammable, environmentally-friendly construction material, that is easy to work with and to clean. Ceramic surfaces are a durable, hygienic wall treatment for

Browse characteristics
Home | About Us | Our work | Design | Products |
Contact | Press | News | Imprint | Privacy Policy | AGB | deutsch